P-80® THIX Temporary Assembly Lubricant Gel
P-80® THIX Temporary Assembly Lubricant gel is a biodegradable assembly aid that eases installation of tight-fitting rubber and plastic parts by reducing the force needed for insertion. Once assembly is complete, the lubricant dries and the part returns to its original condition. P-80® THIX is especially useful in overhead and vertical assembly operations because it remains where it is applied without dripping. P-80® THIX thins out under pressure so it can be used in automated systems or applied manually by dip, brush, or spray techniques.
P-80® THIX Temporary Assembly Lubricant is used to install hoses, o-rings, seals, bushings, gaskets, grommets, grips, and many other rubber and plastic parts. Use P-80® THIX when a thick coating of lubricant is needed, when it is important that the lubricant stay where it is applied, and/or when a prolonged drying time is desired.
Typical viscosity: 12,000 cps at 25° C
Product Specification Chart
|Applications||Industrial Lubricants||Incidental Food Contact Lubricants|
|Applications||P-80® Emulsion||P-80® THIX||P-80® Grip-It||P-80® RediLube||P-80® Emulsion (IFC)||P-80® THIX (IFC)|
|Viscosity Index, cps @25° C||150||12,000||20||20||150||15,000|
|Reduction of Friction||~70%||~70%||~40%||~55%||~70%||~70%|
|Estimated minimun dry time||1 Hour||2 Hours||20 Minutes||20 Minutes||1 Hour||2 Hours|
|Appearance||Milky white to beige||White to beige gel||Clear, colorless||Milky white to light yellow||Milky white to beige||White to beige gel|